md-textil Jed Belt MGS inkl. Versteifung Coyote Brown
Item no.: A-532-0xx
Availability: Pick an option
- Sale only to authorities
- 31 days return policy
- Free shipping from 99 €
- 10% government discount
- German military mail service
DescriptionPLEASE NOTICE: Due to legal regulations, it is currently not possible for us to supply items of the md-textil Modular Belt System to countries outside the german-speaking area of the European Union. For detailed information please contact us at 030 536 042 46 in our office in Berlin.Read more Read less
The md-textil Jed Belt MGS including internal stiffening is the base element of the modular belt system and can be upgraded to a safety belt certified according to EN358, to a climbing harness EN12277 or to a safety harness EN361. Thanks to the AustriAlpin D-Ring Cobra buckle and a unique seam construction that can absorb forces from all directions, this belt has a breaking load of >30kN (>3059kg). The 43mm wide, double laid, TYPVII webbing is manufactured in Germany according to precise md-textile specifications and offers optimum wearing comfort with the highest resistance at the same time. The inside of the Jed Belt is sewn over the entire length with high quality velcro to accommodate adapters for the md-textil leg loops MGS or other equipment. The D-Ring Cobra Buckle is clicked shut effortlessly and then locks reliably. Only if no load rests on the Cobra and both locking devices are operated simultaneously the lock can be opened. This system guarantees completely safe handling. The extra length to adjust the size is for better handling diagonally cut and fixed with Velcro and allows the belt to be adjusted by 10cm in circumference.
The Jed Belt MGS with internal stiffening meets the following certifications:
- In combination with the md-textil modular belt MGS or comparable: EN358 safety belt
- In combination with the md-textil leg loops MGS EN12277 TYP C climbing harness
- In combination with the md-textil chest strap MGS EN12277 TYPE A complete belt AND EN361 safety harness
To obtain the correct waistband size / correct belt length proceed as follows:
- Wearing a trousers the usual way in the service / everyday with the belt is used
- Wearing trousers that you usually wear in service or as EDC
- There must be NO belt in the pants
- Pull the measuring tape through the tabs of the trousers
- Take waistband size
PLEASE NOTE: Activities at heights are particularly risky. Non-compliance with the instructions for use or misuse can lead to serious injuries or even death! Read the instructions for use "Modular Belt System MGS" completely and carefully. Here you will learn everything you need to know about: General safety instructions, service life/ readiness for discard, product inspections/checks, storage, transport, cleaning, modifications and repairs.
Due to the increased security relevance, we would like to ask you to refrain completely from returns of certified articles of the manufacturer md-textil. Components of the modular belt system are subject to strict safety regulations and must be returned by us unconditionally to the manufacturer where they are checked and evaluated for possible defects and wear by expert personnel.
In order to avoid unnecessary returns, we would ask you to proceed as conscientiously as possible in determining the required size and expediency. If you have any questions about the modular belt system, please do not hesitate to contact us by phone or email.
INFORMATION REGARDING REACH / ARTICLE 33 / SVHC
This item´s buckles contain following substances of the candidate list (published 16.01.2020) Article 59 (1,10) of regulation (EG) No.1907/2006 („REACH“) (see website of European Chemicals Agency (EChA) http://echa.europa.eu/) in concentration above 0.1 to a maximum of 0.5% by mass: Lead CAS: 7439-92-1 / EINECS: 231-100-4
Model: Jed Belt MGS inkl. Versteifung
Material: Polyamide / Aluminum
Dimensions: Width app. 43mm
Customer reviewsNo product reviews available.