md-textil Beinschlaufen MGS Schwarz
Item no.: A-520-001
deliverable in 2-3 business days, (International: +5 days) (available in our showroom in Berlin)
- Sale only to authorities
- 31 days return policy
- Free shipping from 99 €
- 10% government discount
- German military mail service
DescriptionPLEASE NOTICE: Due to legal regulations, it is currently not possible for us to supply items of the md-textil Modular Belt System to countries outside the german-speaking area of the European Union. For detailed information please contact us at 030 536 042 46 in our office in Berlin.Read more Read less
With the md-textil leg loops MGS Jed Belt MGS and Jed Belt MGS with internal stiffening can be upgraded to a climbing harness according to EN12277-C in a matter of seconds and do not first have to be laboriously guided through a rope loop or the like. To install the leg loops, open the belt and slide the rope loop onto it, then close the two 25mm Cobra buckles on the thighs so that the belt can be put on quickly even when the cargo pockets are fully packed and size only needs to be adjusted once. There are suspenders on the back to prevent slipping while running, these are attached directly to the belt or e.g. to the M.O.L.L.E. system of a modular belt using the supplied quick release adapters. The leg loops have a 6mm thick padding to allow a certain wearing comfort even with compact dimensions, in the rear area the 25mm belt spreads to a width of approx. 45mm and supports load transfer. The leg loops come in universal length and have a sufficient adjustment range. The overlengths for adjustment are double stitched, so they can be gripped safely even with gloves and the supplied rubber loops fix them securely to the belt.
The leg loops are certified in following combinations:
- In combination with the md textil Jed Belt MGS or Jed Belt MGS stiffened: EN12277 Type C climbing harness
- In combination with the md textil chest strap MGS EN12277 TYPE A full-body harness AND EN361 safety harness
- If in one of the cases the belt is worn in the md-textil modular belt, the EN358 is achieved in parallel as a safety belt
One size fits most.
PLEASE NOTE: Activities at heights are particularly risky. Non-compliance with the instructions for use or misuse can lead to serious injuries or even death! Read the instructions for use "Modular Belt System MGS" completely and carefully. Here you will learn everything you need to know about: General safety instructions, service life/ readiness for discard, product inspections/checks, storage, transport, cleaning, modifications and repairs.
Due to the increased security relevance, we would like to ask you to refrain completely from returns of certified articles of the manufacturer md-textil. Components of the modular belt system are subject to strict safety regulations and must be returned by us unconditionally to the manufacturer where they are checked and evaluated for possible defects and wear by expert personnel.
In order to avoid unnecessary returns, we would ask you to proceed as conscientiously as possible in determining the required size and expediency. If you have any questions about the modular belt system, please do not hesitate to contact us by phone or email.
INFORMATION REGARDING REACH / ARTICLE 33 / SVHC
This item´s buckles contain following substances of the candidate list (published 16.01.2020) Article 59 (1,10) of regulation (EG) No.1907/2006 („REACH“) (see website of European Chemicals Agency (EChA) http://echa.europa.eu/) in concentration above 0.1 to a maximum of 0.5% by mass: Lead CAS: 7439-92-1 / EINECS: 231-100-4
Size: OSFM - One Size fits most
Material: Polyamide / Aluminum
Customer reviewsNo product reviews available.