YETI Tundra 45 Tan

• Évaluations 4.89 / 5 Étoile

  k.A.

  Wie immer alles bestens.

  k.A.

  k.A.

  k.A.

  Afficher tous les avis

• Détails du produit

  Fueling your adventure

  
  The YETI Tundra 45 in Tan comes equipped with all the features of the legendary Tundra series. From the excellent insulating ability to the extreme resilient construction, the mid-sized YETI cooler exceeds all expectations previously associated with mobile coolers.
  
  

  Built like a tank

  
  For a long time, people were used to coolers that lasted at best for one summer and then had to be disposed of. Multi-part designs and large manufacturing tolerances ensured that the coolers fell far short of expectations even when new. This is not the case with YETI products. The housings and lids of the Tundra series are formed as hollow bodies by rotational molding and then foamed with polyurethane. This results in mechanically extremely resistant and yet lightweight components with exceptional heat retention capacity. In conjunction with the lushly dimensioned seals, such as those used in commercial freezers, ensuring that the contents of the Tundra 45 maintains its temperature for a long time.
  
  

  Attention to detail

  
  The lid and chest are connected by an interlocked hinge pin made of rust resistant aluminum. If necessary, the two parts can be connected with two padlocks, thanks to the sturdy eyelets. This protects the precious contents from pickpockets, snackers and even full-grown bears(!). Under normal circumstances, the two thick T-Rex buckles secure the lid and put plenty of pressure on the Coldlock seal. The freezer can be carried either by the Lipgrip handles embedded in the side or if carried in pairs using the reinforced textile loops with plastic handles. Practical rubber feet ensure a secure stand and effectively prevent the YETI Tundra 45 from slipping on smooth surfaces. For securing the cooler during transport on pickups, trailers and boats, the housing has tie-down points for straps.
  
  The YETI Tundra 45 in Tan is a durable piece of gear that will accompany you on your adventures and can be relied upon in any situation.
  
  - Lightweight 10.4 kg (empty)
  - 32,5 l capacity for 28 cans (0,33) or 15 kg ice
  - Rotomolded PE body and lid with extra thick wall thickness (Fatwall Design™)
  - Body and lid completely foamed with PU foam (Permafrost™ Insulation)
  - Doublehaul™ handles on sides allow for pulling from both sides
  - Freezer quality Coldlock™ seal
  - Side recessed, ergonomic Lipgrip™ carry handles
  - Wide-support Neverfail hinges with aluminum bars
  - Rugged, easy-to-grip T-Rex™ rubber latches
  - Two eyelets for locks
  - Tie-down points for lashing straps
  - Slip-resistant rubber feet
  - Leak proof drain valve

  Lire la suite Lire moins

• Caractéristiques

  Couleur: Kaki
  Volume (litres): 32,5
  Matériau: Corps : polyéthylène / Isolation : polyuréthane / Bouchon de vidange : polypropylène / Autre matériel : caoutchouc mixte
  Dimensions: Extérieur : 40,96 x 39,05 x 65,41 cm / Intérieur : 23,81 x 26,99 x 46,67 cm
  Modèle: Toundra 45
  Fabricant: YETI
  Poids: 10,40 kg

• S'accorde avec

  • 
    YETI Tundra 35 Tan 279,90 €
  • 
    YETI Ice 2Lb Clear 24,90 €
  • 
    YETI Ice 1Lb Clear 19,90 €
  • 
    YETI Ice 4Lb Clear 34,90 €

• Évaluations des produits

  Il n'y a pas d'évaluation de produit.
  

  Créer une évaluation de produit

• Sécurité des produits

  Informations du fabricant :

  YETI
  Office 111389
  PO Box 6945
  W1A 6US London
  Grande-Bretagne (GB)
  Téléphone: +44 808 169 7080
  Web: https://eu.yeti.com/

  Personne responsable :

  Visser & Visser Belastingadviseurs B.V.
  Bijdorp-Oost 60
  2992 LA Barendrecht
  Pays-Bas (NL)
  Téléphone: +31(0) 883377200
  Web: www.visser-visser.nl

  Courrier électronique:
  [email protected]